Skip to main content
iStock 1442664779

Elevator Accident Statistics & Common Accidents Every Building Owner Should Know

Elevators are designed to move people safely and efficiently, but like any mechanical system, they can become dangerous when equipment fails, maintenance is neglected, or safety procedures aren’t followed.

For building owners, understanding elevator accident statistics, common causes, and prevention strategies can help reduce risk, protect occupants, and keep elevator systems operating safely.

In this guide, we’ll look at the numbers every building owner should know, and what they mean for your property.

Key Elevator Accident Statistics at a Glance

How common are elevator accidents? While no single data set captures every incident nationwide, the following statistics provide a useful picture of the general risks to consider.

26,158 Elevator and Lift Injuries in One Year

The U.S. Consumer Product Safety Commission (CPSC) National Electronic Injury Surveillance System (NEISS) 2023 data* estimated just over 26,000 injuries associated with elevators and other lifts treated in hospital emergency departments. That works out to approximately 7.8 injuries per 100,000 residents.

For building owners, these elevator injury statistics offer a reminder that even everyday equipment needs consistent attention.

*Important: This CPSC category includes “Elevators, Other Lifts,” so the number does not represent passenger elevators alone. 

856 Cases in the CPSC Sample

The same 2023 NEISS data recorded 856 actual injury cases involving elevators and other lifts across its sampled hospitals, but that number is not the total number of elevator injuries nationwide. NEISS assigns statistical weights to reported cases to produce the larger national estimate.

The sample count and national estimate measure related, but different, things, and neither represents the actual number of elevator accidents per ride.

Elevator Worker Safety

CPSC’s NEISS system is a nationally representative injury-surveillance system that uses emergency-department data to produce nationwide estimates, but these numbers are not the only elevator safety statistics worth looking at.

A 2019 research report from CPWR, archived by the CDC, found 145 fatalities between 2011 and 2016 among construction workers in the U.S. due to elevator-related injuries. Falls to a lower level accounted for 53.5% of those fatalities during that period.

What this means for building owners

These statistics highlight two distinct areas of elevator safety: protecting passengers during everyday use and protecting workers who install, inspect, and service equipment.

Elevator accidents may represent only a small fraction of the millions of elevator trips made every day, but an individual incident can have serious consequences.

6 Common Elevator Accidents Building Owners Should Be Aware of

Not every elevator accident happens because an elevator suddenly falls. Many incidents involve doors, falls, leveling problems, equipment failures, or maintenance activities.

1. Elevator Door Accidents

Elevator doors open and close countless times in busy buildings. Potential hazards include:

  • Doors closing on passengers
  • Malfunctioning door sensors
  • Doors failing to reopen
  • People becoming caught between doors
  • Hoistway doors opening when the elevator is not present
  • Damaged or improperly adjusted door equipment

For building owners, elevator door problems should never be treated as a minor inconvenience.

2. Trips and Falls

Passengers can lose their balance while entering or exiting an elevator, particularly when the elevator car does not stop level with the floor. Even a relatively small difference between the elevator floor and building floor can create a hazard, particularly for:

  • Older adults
  • People with mobility limitations
  • People carrying objects
  • Children
  • Anyone using a wheelchair or mobility device

3. Elevator Shaft Falls

Open elevator shafts present an extremely serious hazard, particularly during construction, installation, and maintenance work.

A person can fall into a shaft if:

  • A landing door is left open
  • A protective barrier is missing or damaged
  • An elevator is taken out of service improperly
  • Maintenance work creates an unprotected opening
  • Safety interlocks are bypassed

OSHA requires appropriate protection at elevator landing openings in the workplaces covered by its standard.

4. Elevator Entrapment

Passengers can become trapped inside an elevator because of:

  • Power failures
  • Mechanical problems
  • Controller failures
  • Door problems
  • Safety-system activation
  • Equipment breakdowns

An entrapment does not automatically mean someone has been injured. However, attempting to force the doors open or exit a car that is not level with a landing can create serious danger. Building staff should know how to communicate with trapped passengers and contact qualified emergency responders rather than attempting an unauthorized rescue.

5. Crushing & Caught-Between Accidents

Maintenance personnel face hazards that passengers typically do not encounter. These include being:

  • Caught between moving equipment
  • Crushed between the elevator car and shaft
  • Struck by moving components
  • Trapped in an elevator pit
  • Injured while working on top of the elevator car

Such incidents underscore the importance of controlling equipment movement and following proper safety procedures during service. OSHA accident investigations have documented fatal incidents involving elevator pits and maintenance work.

6. Elevator Maintenance Accidents

Elevator technicians work around powerful mechanical, electrical, and moving systems. Potential hazards include:

  • Electrical exposure
  • Unexpected elevator movement
  • Falls
  • Moving machinery
  • Hoistway hazards
  • Improper lockout/tagout
  • Bypassed safety devices

OSHA warns that machinery can cause severe injuries when hazardous energy is not properly controlled during servicing.

For building owners, elevator maintenance safety starts with choosing qualified professionals and ensuring untrained building staff do not attempt repairs.

What Causes Elevator Accidents?

Elevator accident causes vary depending on the equipment, operating conditions, and activities taking place when an incident occurs. Not every accident results from equipment failure. However, knowing common causes of elevator accidents can help you spot problems that need professional attention.

Poor or Inadequate Maintenance

Elevators contain mechanical and electrical components that need regular inspection, adjustment, and servicing. When maintenance is delayed, problems such as worn door parts, faulty sensors, or inconsistent leveling can go unnoticed.

A consistent preventive maintenance program helps identify developing problems and address them before they lead to more serious failures.

Worn Elevator Components

Frequent use stresses elevator doors, rollers, bearings, braking components, and other moving parts. As components wear, an elevator may become noisier, operate less smoothly, or experience repeated service interruptions.

Routine inspection and timely replacement of deteriorating parts help maintain reliable operation.

Electrical Problems

Elevators rely on controllers, wiring, sensors, switches, and electrical safety circuits. Faults in these systems can affect door operation, leveling, communication, or overall operation.

Qualified technicians should diagnose electrical problems. Building staff should never attempt to bypass an electrical fault simply to restore service.

Door & Interlock Problems

Elevator doors have safety mechanisms designed to prevent unsafe operation. Door interlocks help prevent an elevator from operating when landing doors are not properly secured. Sensors and reopening devices help protect passengers while they enter or exit.

When these components fail or fall out of adjustment, they can create safety hazards and repeated shutdowns. OSHA specifically requires that elevator safety devices should not be overridden or made inoperable.

Improper Repairs

Incorrect adjustments, unsuitable replacement parts, and incomplete repairs can introduce new equipment problems. Elevator work requires specialized knowledge, particularly when dealing with door safety circuits, brakes, controls, and emergency systems.

Appropriately licensed or qualified elevator professionals should perform repairs, with required testing completed before the equipment returns to service.

Aging or Obsolete Equipment

Older elevators are not automatically unsafe. However, aging systems may need more frequent repairs, and some replacement components can become difficult to obtain.

When breakdowns become recurring, or the equipment no longer meets applicable requirements, elevator modernization may be the more practical long-term solution.

Human Error

Some elevator accidents involve unsafe actions rather than mechanical defects. Examples include forcing open elevator doors, entering a shaft without proper precautions, overriding safety devices, or attempting repairs without the necessary training.

Clear building procedures and qualified service personnel are key to preventing elevator accidents.

How Building Owners in Chicago Can Prevent Elevator Accidents

The best way to reduce elevator risk is to focus on prevention rather than emergency repairs.

1. Schedule Preventive Maintenance

One of the most effective elevator maintenance best practices is servicing equipment before it fails. A preventive maintenance program should account for the elevator’s age, design, traffic level, and condition. Service visits may include inspecting door operators, checking leveling accuracy, testing safety devices, and examining mechanical and electrical components.

Chicago Elevator offers elevator maintenance services tailored to each building’s equipment and operating needs.

2. Complete Required Inspections

In Chicago, the City’s Annual Inspection Certification program requires building owners and property managers to arrange annual inspections by state-licensed, third-party inspection companies. Results must be submitted to the Department of Buildings through the AIC portal. Additional testing and compliance requirements may also apply depending on the equipment and jurisdiction.

A service provider familiar with elevator code compliance and violation removal can help you address deficiencies and prepare for required inspections.

3. Address Problems Immediately

Don’t ignore reports such as:

  • “The elevator is shaking.”
  • “The doors aren’t closing correctly.”
  • “The elevator stopped between floors.”
  • “The elevator isn’t level with the floor.”
  • “There’s a strange noise.”
  • “The elevator keeps going out of service.”

Small operating issues can indicate larger mechanical or electrical problems. Prompt repairs can reduce the risk of further damage and help prevent avoidable service interruptions.

4. Never Disable Safety Devices

Elevator safety devices serve important functions, from keeping landing doors secured to detecting unsafe operating conditions. Never allow staff to bypass door interlocks, disable protective devices, or override safety controls to keep an elevator running.

Any necessary testing or adjustment of these systems must be performed by qualified personnel following applicable safety procedures.

5. Keep Elevator Areas Secure

Restrict access to:

  • Machine rooms
  • Elevator pits
  • Hoistways
  • Control equipment
  • Other service areas

Only trained and authorized personnel should perform elevator maintenance or repairs. Coordinate with the service team to protect areas where workers or building occupants might encounter hazards.

6. Keep Detailed Maintenance Records

Documenting maintenance is an important part of elevator safety for building owners. It should include:

  • Inspections
  • Repairs
  • Preventive maintenance
  • Replaced components
  • Testing
  • Service calls
  • Recurring problems
  • Modernization work

A clear maintenance history helps technicians spot recurring issues and lets you track your equipment’s condition. This is why a structured elevator maintenance agreement always includes keeping service visits and documentation consistent.

Protect Your Building With Professional Elevator Service

Elevator accident statistics show why ongoing maintenance, timely repairs, and required inspections matter. While every incident is different, many equipment-related hazards can be identified and addressed before they become bigger problems.

Staying on top of elevator safety also means understanding the requirements that apply to your property.  Whether you are dealing with recurring breakdowns, preparing for an inspection, or reviewing an aging elevator system, our team can help you understand what needs attention, including the common violations to avoid.

Don’t wait for an elevator accident to reveal a problem that could have been addressed earlier. Contact our team to discuss your equipment and schedule a professional service assessment.

iStock 1386885905

Lake Effect Weather & Your Elevator: Hidden Risks for Chicagoland Properties

Chicago weather can be hard on buildings. Snow, ice, precipitation, temperature changes, and strong winds can create maintenance challenges that property owners and managers need to plan for.

For properties with elevators, lake effect weather can affect areas beyond the parts of the building people typically think about. Moisture, precipitation, salt, and temperature changes can affect elevator entrances and other parts of the system, creating conditions that can lead to operational problems.

Some of these weather-related issues are easy to overlook until they begin affecting elevator operation. Knowing what to watch for helps property managers spot potential problems and address them before they become more disruptive.

What Is Lake Effect Weather?

Lake effect weather occurs when cold air moves across a relatively warmer body of water, picking up heat and moisture before moving over land. In Chicago, Lake Michigan can contribute to localized weather changes, including periods of rain or snow, depending on the temperature and atmospheric conditions.

When this weather reaches a property, its effects can extend beyond what is visible outside the building. For an elevator system, changes in temperature, moisture, and building pressure can affect different components and how they operate.

5 Hidden Elevator Risks During Lake Effect Weather in Chicagoland

Lake effect weather can bring different combinations of snow, rain, moisture, strong winds, and temperature changes to the Chicagoland area. These conditions can affect different parts of an elevator system, from door equipment and mechanical components to electrical equipment and the hoistway. 

Here are five elevator risks that property owners and managers should watch for:

1. Ice & Snow Buildup Can Interfere With Elevator Door Operation

Snow, rain, and moisture can collect around elevator entrances and door sills. During freezing temperatures, that moisture can turn to ice around tracks and other areas involved in door movement.

Ice and snow buildup can restrict normal door movement or prevent doors from closing properly. Even when freezing is not an issue, moisture and debris around the entrance can interfere with operation.

Keeping elevator entrances and door areas clear of snow, ice, moisture, and debris can help reduce the risk of door problems. If doors begin sticking, moving differently, or failing to close properly, have the elevator system inspected by a qualified technician to identify the issue.

2. Cold Temperatures Can Affect Lubricant Performance

Cold temperatures can affect the way lubricants perform within mechanical elevator components. As temperatures drop, some lubricants can become more viscous, which may affect components that depend on proper lubrication.

The impact varies depending on the elevator system, the components involved, and the lubricant being used. Elevators exposed to significant temperature changes may require closer attention when temperatures drop sharply.

Regular maintenance can help confirm that the appropriate lubricants are used and that mechanical components operate as intended. Because traction and hydraulic systems use different components, the lubricants and cold-weather effects can vary between them.

3. Rain, Snow & Moisture Can Reach Electrical Components

Precipitation does not always stay outside the building. Rain, snow, and moisture can enter through building openings or be carried inside by people and equipment. Snow can also melt as temperatures rise, allowing water to collect around elevator equipment.

Moisture near electrical components can create maintenance and operational concerns. The level of risk depends on the elevator’s design, equipment location, and exposure to water. Older buildings can be especially vulnerable, since aging seals, entrances, and equipment give moisture more ways to reach sensitive components.

After heavy rain, snowfall, or snowmelt, check elevator areas for signs of water intrusion. A qualified elevator professional should evaluate moisture near electrical or mechanical components.

4. Strong Winds Can Affect Building Pressure Around the Hoistway

Lake effect weather can bring strong winds that interact with a building’s exterior and ventilation openings. In taller buildings, pressure changes can also interact with the vertical elevator hoistway.

These pressure differences can affect how hoistway doors operate in some buildings. Doors may become more difficult to open, close, or latch properly when building pressure changes significantly.

Because this issue is related to airflow and pressure rather than visible buildup, it can be easy to overlook when investigating elevator problems.

5. Freeze-Thaw Cycles Can Create Recurring Issues

Temperatures can move above and below freezing as weather changes, creating repeated cycles of melting and refreezing. Snow and ice can melt during warmer periods, while rain and other moisture can later freeze when temperatures drop again.

This repeated exposure can create new ice buildup around elevator entrances and other areas of the property. It can also allow moisture to reach areas that were dry when temperatures were higher.

Monitoring elevator areas through changing weather can help property teams identify recurring moisture, ice, and operational issues before they become larger problems.

10 Preventive Tips to Protect Your Elevator During Lake Effect Weather

Preventive measures should focus on the parts of the elevator system most likely to be affected by moisture, temperature changes, and changing conditions around the property. The following tips can help address these areas before they lead to elevator problems:

  1. Use Cold-Rated / Weather-Appropriate Lubricants. Have the elevator technician confirm that the lubricants used are appropriate for the temperatures the equipment may be exposed to.
  2. Schedule a Pre-Weather Maintenance Visit. Have the elevator professional check weather-sensitive components before periods of significant temperature changes or precipitation.
  3. Keep Door Sills and Thresholds Clear. Make sure elevator entrances are kept clear of snow, ice, salt, moisture, and debris that could interfere with door movement.
  4. Maintain Elevator Pit Drainage. Confirm that sump pumps and other water-management equipment serving the elevator pit are maintained and working properly.
  5. Address Water Intrusion. Have water intrusion around the elevator system addressed before it can reach electrical or mechanical equipment.
  6. Seal Areas Exposed to Outside Air. Ask the elevator professional to identify areas where unwanted outside air or moisture can enter the hoistway or machine room.
  7. Protect Electrical Equipment From Moisture. Have the elevator professional check whether electrical components are adequately protected from moisture and condensation.
  8. Review Weather-Related Service History. Review previous elevator service calls to identify recurring problems during periods of significant precipitation or temperature changes.
  9. Report Changes in Elevator Operation Early. Report recurring door problems, unusual sounds, leveling changes, or other operational changes before they become larger service issues.
  10. Keep Preventive Maintenance Current. Stay current with scheduled elevator maintenance so weather-related wear and equipment concerns can be identified before they lead to unexpected downtime. If you are reviewing your coverage, read our guide to what to look for in an elevator maintenance agreement 

When Should You Call an Elevator Professional?

Some weather-related maintenance can be handled as part of routine property care, but elevator equipment problems require professional attention.

Contact an elevator professional if you notice:

  • Elevator doors sticking, failing to close, or operating differently
  • Changes in elevator movement or leveling
  • Unusual sounds during operation
  • Water or moisture around elevator equipment
  • Recurring problems during periods of changing weather
  • An elevator that stops operating

When these issues appear, an inspection can help identify the source before the problem becomes more disruptive. Elevator maintenance and repair require a qualified elevator professional and should not be handled by building staff alone. 

Get Expert Elevator Service From Chicago Elevator

Lake effect weather can create different challenges for elevators, depending on the building, equipment, and exposure to moisture, temperature changes, and precipitation. Our team understands these factors and can help identify what your elevator requires to stay reliable through changing weather.

If you want the experts on your side, our team is happy to help. Contact Chicago Elevator to discuss your elevator’s needs.

iStock 2259954945

How Building Density in Chicago Affects Elevator Maintenance and Downtime

Chicago is one of the most densely built cities in the country. The concentration of buildings, occupants, and daily activity that defines this city puts real pressure on elevator systems, and most standard maintenance programs aren’t built to handle it. If you own or manage a commercial property in Chicago, your elevator is working harder than you might think.

If you’re a building owner or property manager that wants to understand exactly how the Chicago urban environment affects elevator performance and what it means for system maintenance, this guide is for you.

What Building Density Actually Means in Chicago

Building density isn’t just a planning term. In practical terms, it means a high concentration of buildings and occupants packed into a defined geographic area, and in Chicago, that translates directly into more foot traffic, more elevator cycles, and more cumulative wear per square mile than you’d find in lower-density cities.

It’s also worth noting that Chicago’s building density isn’t uniform across the city. The Loop, the Near North Side, and other dense commercial corridors place far greater demands on elevator systems than properties in outlying neighborhoods. A building in River North running a busy mixed-use operation isn’t facing the same conditions as a low-rise office building in the suburbs, and it shouldn’t be maintained on the same schedule.

Building density directly affects how hard elevators work, how quickly components wear down, and how often service visits are actually needed to keep things running reliably.

How Building Density Puts More Demand on Chicago Elevators

Here are a few of the reasons the city’s building density makes elevator maintenance and repair a little more complicated for elevator companies like Chicago Elevator:

More Buildings Mean More Aging Infrastructure

A significant share of Chicago’s dense commercial building stock was constructed decades ago. The elevator systems in those buildings weren’t designed for today’s usage levels, and in many cases, they’ve been operating well beyond their intended service life.

Older equipment in high-density areas wears faster, requires more frequent adjustments, and is more vulnerable to unexpected failures when maintenance intervals don’t keep pace with actual demand. When maintenance gets deferred, skipped, or delayed, service visits don’t just create minor inconveniences. They create the conditions for unexpected repairs that take systems offline at the worst possible times.

High Occupancy Means More Daily Elevator Cycles

Elevators in Chicago’d buildings run significantly more cycles per day than those in lower-traffic environments. A busy office tower or mixed-use building in the Loop might log hundreds more door open-and-close cycles daily than a comparable building in another city. That volume adds up fast.

Higher cycle counts accelerate wear on door systems, cables, motors, and mechanical components in ways that a standard maintenance schedule simply doesn’t account for. The math is straightforward:

  • More usage means faster wear
  • Faster wear means more frequent service is needed to stay ahead of failures
  • A maintenance program that ignores actual cycle counts isn’t protecting your building

Usage volume must be a factor in determining how often an elevator needs to be serviced. Your elevator maintenance program should be calibrated to how your building actually operates, not how an average building operates.

Dense Urban Buildings Have Narrow Maintenance Windows

Buildings with retail tenants, medical operations, or around-the-clock occupants have limited windows for scheduled maintenance work without disrupting daily operations. A hospital can’t take its elevator offline during peak hours. A mixed-use building with ground-floor retail and residential above has competing demands on elevator availability throughout the day.

When access is restricted, maintenance visits can get compressed, and compressed visits are where small issues go undetected and grow into larger failures. A local elevator company that works regularly with dense urban buildings in Chicago understands these constraints and knows how to schedule around them. That kind of operational familiarity is something a national provider working from a standardized service model typically can’t offer, but Chicago Elevator Company can.

Unique Maintenance Challenges in Chicago’s Building Environment

Chicago’s climate adds another layer of stress that building owners outside this market don’t face to the same degree. Extreme cold in winter, high humidity in summer, and the temperature swings in between all affect elevator mechanical systems. These conditions:

  • Accelerate wear on components
  • Affect lubrication viscosity
  • Require more frequent inspection and adjustment than what you’d find in more temperate cities

There’s also a less visible challenge that comes with operating in a dense urban market: service provider capacity. Dense urban buildings often share elevator contractors across many properties, and that creates scheduling pressure. When a service company is stretched thin across a large portfolio, visits can get shortened, skipped, or rushed, and the building owner is often the last to know.

This is why understanding the structure of your maintenance agreement matters as much as the service itself. A generic contract that doesn’t account for your building’s specific conditions isn’t giving you what you’re paying for.

How to Manage Elevator Maintenance in Chicago

The starting point is matching the maintenance schedule to what your building actually demands. Foot traffic volume, hours of operation, equipment age, and tenant mix all factor into how frequently your elevator needs to be serviced. A building with a high-volume lobby, older traction equipment, and commercial tenants running extended hours needs a different program than a low-rise office building with moderate daily usage.

Beyond frequency, the fundamentals matter:

  • Stay ahead of annual inspection deadlines. Don’t wait until the last minute to schedule your inspection. Getting ahead of it gives you time to address any issues before they become violations.
  • Keep organized maintenance records. Documentation should be accessible in the machine room at all times. If an inspector asks for records and you can’t produce them, that’s a problem you don’t want.
  • Address minor issues before they escalate. Buildings with reliable elevator performance consistently address small issues early. Those dealing with repeated breakdowns and code compliance issues typically don’t. Violations rarely come out of nowhere. They develop over time when small problems go unaddressed.

Building owners who stay actively engaged with their service provider experience fewer breakdowns and lower long-term maintenance costs. That means asking questions after every visit, reviewing service documentation, and flagging anything that seems off before it becomes a problem.

Why Local Knowledge Makes a Difference in Chicago

A local service provider who understands Chicago’s building stock, its aging infrastructure, operational demands, narrow service windows, and seasonal stresses, brings expertise that national chains with standardized processes can’t match. Beyond faster response times, local independence also means building owners aren’t locked into a single manufacturer’s parts and pricing or dependent on regional dispatch centers to approve repairs.

Elevator maintenance in dense Chicago buildings is more demanding than most realize. The right local partner provides measurable advantages in reliability, compliance, and long-term cost that a standard annual contract can’t deliver.

We’re Built for the Demands of Chicago Buildings

Chicago Elevator serves Chicagoland and Northwest Indiana with the responsiveness and local expertise that dense urban buildings actually require, not a service model built for somewhere else. We build maintenance programs around each building’s actual usage and conditions. Not a one-size-fits-all contract, or a generic schedule. We create a maintenance program that fits your building.

If you’re ready to talk through what that looks like for your property, reach out to our team to request a quote, and we’ll take it from there!

iStock 2220921483

What Elevator Technicians Inspect During a Maintenance Visit

Most building owners sign a maintenance contract, hand over access, and assume things are being handled. That’s a reasonable assumption, but it leaves many people unsure about what actually happens during each visit, what the technician is checking, and whether they’re getting full value from every service call.

This guide pulls back the curtain on exactly what a licensed elevator technician inspects, tests, and documents during a maintenance visit so you know precisely what you’re paying for.

Understanding the Full Value of an Elevator Maintenance Visit

Preventive maintenance isn’t just about keeping the elevator running. It’s about catching small issues before they turn into expensive repairs, unexpected shutdowns, or code violations that put the building owner in a difficult position.

Most unexpected elevator breakdowns don’t come from sudden mechanical failure. They trace back to missed or incomplete service visits, during which developing problems went unnoticed and unaddressed. A worn component caught during a routine visit costs a fraction of what it costs after it causes a breakdown or a failed inspection.

A thorough maintenance visit also protects the building owner from liability and downtime. When equipment is properly serviced and documented, building owners have a clear record showing the elevator was maintained to code, and that record matters when an inspector shows up or when a tenant raises a concern.

Learn more about what a solid elevator maintenance program looks like.

What an Elevator Technician Checks During Every Maintenance Visit

Here is a breakdown of every system a licensed technician should be checking during each visit. Think of it as the checklist that comes with every good maintenance visit.

Door Systems & Safety Sensors

Door systems are the number one source of elevator callbacks and service calls, which is why technicians check door timing, closing force, and sensor alignment on every visit. A misaligned or worn door sensor can cause the elevator to stop mid-operation or fail to close properly, and both of those issues frustrate tenants and create liability exposure for the building owner. Door components are inspected for wear and adjusted before they cause a problem.

Cab Leveling & Floor Alignment

A cab that stops above or below floor level is both a safety hazard and an ADA compliance issue. Technicians check and adjust leveling systems on every visit to make sure the cab stops flush with each floor. When leveling issues are consistent or recurring, that’s often a sign of a deeper mechanical problem that needs further evaluation rather than just another adjustment.

Safety Devices & Emergency Systems

Safety devices including the governor, safeties, and buffers are tested to confirm they’ll function correctly in an emergency. The emergency phone or communication system inside the cab is also tested on every visit as required by Illinois code. These aren’t optional checks. They are code requirements that protect passengers and building owners alike, and any maintenance visit that skips them is leaving the building exposed.

Machine Room & Mechanical Components

In the machine room, technicians check oil levels, motor condition, controller diagnostics, and signs of overheating or unusual wear. Lubrication of moving parts, including cables, guide rails, and drive components, is a core part of every visit, not something that gets done only occasionally. The condition of the machine room itself is also assessed, as clutter, moisture, or temperature issues in that space can directly affect equipment performance over time.

Hoistway & Pit Condition

The hoistway and pit are inspected for water intrusion, debris, and signs of structural wear. A clean, dry pit is a code requirement and one of the clearest indicators of how consistently a building’s elevator has been maintained. Pit lighting, pit stop switches, and ladder condition are all verified during a thorough visit, as inspectors check each of these items annually.

Control Systems & Electrical Components

Technicians review controller diagnostics for fault codes and error trends that may signal developing problems before they cause a shutdown. Wiring, connections, and electrical components are checked for signs of wear, corrosion, or loose connections. Catching electrical issues early is one of the most effective ways to prevent unexpected shutdowns and the costly elevator repairs that follow them.

What Gets Documented After Every Visit

A thorough maintenance visit always ends with written documentation. What was inspected, what was found, what was adjusted, and what may need follow-up should all be captured in a service report that the building owner receives after every visit.

Illinois requires maintenance logs to be kept on site and available during annual inspections. That paperwork isn’t just a formality. It’s a record that protects the building owner when an inspector requests service history or when a tenant raises a concern about the condition of the equipment.

A service company that doesn’t provide written documentation after every visit is a red flag. If you’re unsure what your current agreement covers, it’s worth reviewing. Understanding elevator maintenance agreements is a good place to start.

The Difference Between a Thorough Visit & a Surface-Level Checkup

Not all maintenance visits are equal. Some companies move quickly through a checklist without actually servicing the equipment, while others take the time to do the work correctly. As a building owner, a few things are worth paying attention to: how long the technician spends on site, whether they communicate what they found, and whether they hand over documentation before they leave.

Non-proprietary service agreements give building owners the freedom to switch providers if the quality of service isn’t meeting expectations. That flexibility matters because building owners shouldn’t feel locked into a relationship that isn’t delivering results. A good elevator maintenance provider earns the contract on every visit, not just when the contract is signed.

What a Maintenance Visit Should Never Skip

Emergency phone testing is one of the most frequently skipped items during rushed visits, but it’s also one of the first things an inspector checks. A non-functioning emergency phone is an automatic violation and a direct risk to passenger safety.

Pit condition is another item that gets overlooked when a technician doesn’t take the time to go all the way down. A wet or cluttered pit is a code violation, and inspectors look for it every time.

Cab leveling adjustments get deferred when a technician is moving fast, but recurring leveling problems signal deeper mechanical issues that only get more expensive the longer they go unaddressed.

Safety device verification should happen on every visit without exception. Treating it as a periodic task rather than a standard part of every service call is a shortcut that leaves the building exposed.

Building owners have every right to ask their service provider for a detailed checklist of what’s covered on every visit. A reliable provider will answer that question clearly and without hesitation. If a provider can’t or won’t answer it, that’s a sign to look elsewhere.

3 Questions to Ask Your Elevator Service Provider After Every Visit

After every maintenance visit, building owners should be asking three straightforward questions:

  1. What did you find?
  2. What did you adjust?
  3. Is there anything I should watch for before the next visit? 

These aren’t difficult questions, and they don’t require a technical background to ask. They just require a service provider willing to answer them honestly.

A reliable service company welcomes these questions and answers them clearly because communication is part of the job, not an add-on. Building owners who stay engaged with their service provider catch problems earlier, make better decisions about their equipment, and avoid costly surprises that come from being kept in the dark.

Working With a Qualified Elevator Technician Matters

Certified, experienced technicians are the foundation of safe, code-compliant elevator maintenance. An unqualified or undertrained technician might complete a visit without identifying the issues that matter most, leaving the building owner exposed to liability, failed inspections, and preventable equipment failures.

Incomplete or low-quality inspections from unqualified providers are a real risk in this industry, and the consequences fall on the building owner, not the contractor. Working with a provider that employs certified mechanics, maintains clear service records, and communicates openly after every visit is what a long-term, accountable service relationship looks like.

Talk to Chicago Elevator About Your Maintenance Needs

A maintenance visit should never feel like a mystery. You should always know what was done, what was found, and what comes next. That’s not a high bar. It’s the standard every building owner deserves.

Chicago Elevator provides thorough, documented maintenance visits with clear communication after every service call. If you’re not getting that from your current provider, or if you want to get your maintenance program on solid footing, we’re ready to help. Contact our team or request a quote, and we’ll walk you through exactly what a proper maintenance program looks like for your building.

iStock 2231197625

Understanding Elevator Maintenance Agreements: What to Look For

Elevators are one of the most important systems in any commercial or residential building. When an elevator stops working, it quickly becomes a major disruption. A broken elevator is more than an inconvenience; it poses liability, safety risks, and potential code violations. That’s why a clear elevator maintenance agreement is essential for building owners and property managers.

Regular maintenance helps keep elevators operating safely, reliably, and in compliance with local codes and safety regulations. However, not all elevator maintenance agreements offer the same value.

Before signing an elevator service contract, it’s important to understand what’s included and how to choose an agreement that meets your building’s specific needs.

What is an Elevator Maintenance Agreement?

An elevator maintenance agreement is a contract between a building owner and a service company that specifies how the building’s elevators will be maintained. It defines how the elevator system will be inspected, serviced, and repaired to keep it operating safely and reliably. 

The purpose of an elevator service agreement is to ensure consistent preventative maintenance. Technicians regularly inspect key components to identify wear or potential issues before they cause downtime. 

Check out our maintenance services for your elevator needs.

Elevator Maintenance Agreements vs. Upgrade Contracts: Key Differences

Although often used interchangeably, “elevator maintenance agreement” and “elevator service contract” have important differences to consider before signing.

An elevator maintenance agreement typically offers broader coverage. It emphasizes proactive, ongoing care through scheduled visits, inspections, adjustments, and preventive work to ensure reliable, long-term operation.

In contrast, an elevator repair or upgrade service contract is often more specific or transactional. It may cover specific repairs, a single modernization, or an upgrade project with a specific scope of work and pricing. Many service contracts are reactive, addressing issues only when they arise rather than preventing them.

Choosing between the two depends on your building’s size, usage, and regulatory requirements. Understanding these distinctions helps you avoid unnecessary costs and ensures critical systems receive appropriate service.

Types of Elevator Maintenance Agreements

Elevator maintenance agreements typically fall into two categories: full-service and limited-service contracts. The best option depends on your building’s specific requirements, so here’s some tips on what to look for to decide which makes sense for you.

Full-Service Contracts

A full-service (or comprehensive) maintenance agreement typically covers routine maintenance, parts, labor, emergency callbacks, and often safety testing and compliance checks. This is the most inclusive option and offers predictable costs, as most expenses are included in the contract.

This agreement is recommended for high-traffic buildings, older elevator systems, or facilities where unplanned downtime would cause significant disruption. The higher upfront cost is often balanced by avoiding unexpected repair expenses.

Limited-Service Contracts

A limited-service (or partial) contract covers routine preventive maintenance, such as inspections, lubrication, and adjustments, but usually excludes parts and repairs beyond a defined scope. Additional repairs are billed separately.

This option offers lower monthly or annual costs but less predictable expenses over time. It is suitable for newer systems in good condition or low-use facilities with a lower risk of major breakdowns.

Common Services Included in Elevator Maintenance Agreements

Regardless of the type of contract, most elevator maintenance agreements include some combination of the following:

  • Routine inspections and preventive maintenance visits
  • Safety testing and performance checks
  • Lubrication, adjustments, and minor component replacements
  • Emergency callback service
  • Code compliance checks and documentation
  • Parts replacement (in full-service agreements)

Always confirm exactly what is covered and what is not. Ambiguous contract language rarely benefits you. Choosing a contract that matches your building’s usage helps ensure consistent performance and long-term reliability.

4 Key Factors to Consider When Choosing an Elevator Maintenance Agreement

Choosing an elevator maintenance agreement involves more than just price. Focus on long-term value for your building and its occupants. Keep these four key factors in mind as you decide:

1. Scope of Services Provided

Begin by clarifying what the agreement includes. Basic contracts may cover only routine lubrication and inspection, while comprehensive agreements can include parts, repairs, safety upgrades, and modernization. 

Request detailed information from elevator service companies. Ensure you receive a clear written breakdown of inclusions, exclusions, and procedures for additional work. Ambiguity in these areas often leads to hidden costs.

2. Response Time & Emergency Service

Elevator downtime impacts accessibility, tenant satisfaction, and, in healthcare or residential settings, safety. Response time commitments are among the most important, yet often overlooked, aspects of a maintenance agreement.

Choose contracts that clearly define response times for standard and emergency service calls. A 24/7 emergency service clause should be standard from any reputable provider. 

3. Contract Length & Flexibility

Elevator maintenance agreements typically last one to five years, though longer terms are available.

Before committing to a multi-year agreement, inquire about exit clauses, renewal terms, and procedures if your building’s needs change.

4. Costs & Payment Structures

Cost structures in elevator maintenance contracts vary. Some are billed annually, others quarterly or monthly. Full-service agreements include parts and labor as fixed costs, while limited contracts may offer parts and repair expenses on more of an ala carte basis.

Consider the total value, not just the base contract price. Ask how major component failures are handled and whether labor rates for out-of-scope work are pre-negotiated or set by the provider. Inquire about parts sourcing. Access to non-proprietary parts is a significant advantage, as it prevents vendor lock-in and can reduce long-term maintenance costs.

Common Pitfalls to Avoid in Elevator Maintenance Agreements

Even well-intentioned building owners can end up in contracts that don’t serve them. Here are the most common mistakes and how to avoid them.

  • Overlooking hidden fees. Some contracts appear low-cost upfront but include charges for callbacks, after-hours service, certain parts, or travel time. Always ask for a full breakdown of what is and isn’t included before signing.
  • Not defining clear response times. A contract that doesn’t specify response windows leaves you with no recourse when service is slow. Ensure response commitments are explicitly stated and documented in writing.
  • Neglecting contract renewal clauses. Auto-renewal provisions can lock you into another term without your agreement. Know when your contract renews and what the notice period is for cancellation or renegotiation.
  • Ignoring the fine print on parts and labor. Some contracts cover parts only up to a certain cost threshold. Others require you to use proprietary parts at a premium. Understand how parts and labor are handled before any issues arise.
  • Choosing based on price alone. The lowest bid doesn’t always represent the best value. Weigh what’s included, who’s doing the work, and how the company communicates. You’ll be in an ongoing relationship with this provider, so choose one you can trust.

Elevator Maintenance Agreements: A Long-Term Partnership for Building Efficiency

A good elevator maintenance agreement is more than just a business deal; it creates a dependable and open partnership. When done well, it protects an important part of the building, helps meet safety rules, and keeps everyone safe.

Over time, a well-maintained elevator agreement means your elevators break down less often, operate more smoothly, are safer, and follow safety protocols. It also helps you plan costs, avoid big surprise repairs, and keep your elevators running longer. Keeping up with maintenance also gives you a record of service, which is helpful during inspections or when you need to show the building has been properly cared for.

Think of it as an investment in your building’s operational efficiency, one that pays dividends in avoided repairs, tenant confidence, and peace of mind. The right provider becomes a genuine partner in maintaining the value and functionality of your property.

Let’s Talk About the Right Maintenance Agreement for You

Every building is different, and so is every maintenance agreement. The right elevator maintenance contract should match your building’s unique needs.

If you’re reviewing your current elevator service agreement or considering a new maintenance plan, it helps to work with a service provider that understands your building and explains clearly what you can expect.

Chicago Elevator works with building owners and property managers across Chicago and Northwest Indiana to provide reliable elevator maintenance and service agreements built to last.

A clear maintenance strategy today can help keep your elevators safe, dependable, and running smoothly for years to come.

Get the right elevator maintenance agreement for your building

→ Request a quote from our expert team